TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 658 of 932

TM 9-2350-261-20-3

REPLACE/REPAIR HYDRAULIC TANK — Continued

0585 00

FOLLOW-THROUGH STEPS

WARNING

Loose clothing is dangerous around moving belts and pulleys. You could get badly hurt if your

clothes get caught in moving parts.

WARNING

An inoperable/unsafe ramp can fall and kill soldiers. Seal off area behind ramp during testing

and bleeding of hydraulic lines.

1.

Start engine (see your -10). Check for hydraulic leaks.

2.

Raise and lower ramp several times to bleed air from system (see your -10).

3.

Install driver’s power plant access panel (WP 0430 00).

4.

Install power plant rear access panel (WP 0431 00 or WP 0433 00).

5.

Raise and lock ramp (see your -10).

6.

Stop/shutdown engine (see your -10).

END OF TASK

0585 00-8