TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 645 of 932

TM 9-2350-261-20-3

REPLACE RAMP CONTROL VALVE TO HYDRAULIC TANK HOSE — Continued

0583 00

INSTALLATION

1.

Install quick disconnect assembly (7) on adapter (8).

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

2.

Apply sealing compound to male threads of hose (5). Install hose on quick disconnect assembly (7) and elbow (6).

3.

Place two clamps (3) on hose (5). Align clamps with oil filter bracket screws (4). Secure with two washers (2) and

new locknuts (1).

058300-3