TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 636 of 932

TM 9-2350-261-20-3

REPLACE RAMP PUMP TO PRESSURE RELIEF VALVE HOSE — Continued

0581 00

FOLLOW-THROUGH STEPS

WARNING

Loose clothing is dangerous around moving belts and pulleys. You could get badly hurt if your

clothes get caught in moving parts.

WARNING

An inoperable/unsafe ramp can fall and kill soldiers. Seal off area behind ramp during testing

and bleeding of hydraulic lines.

1.

Fill hydraulic tank (WP 0120 00).

2.

Start engine (see your -10). Check for hydraulic leaks.

3.

Raise and lower ramp several times to bleed air from system (see your -10).

4.

Install power plant rear access panel (WP 0433 00).

5.

Raise and lock ramp (see your -10).

6.

Stop/shutdown engine (see your -10).

END OF TASK

0581 00-4