TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 635 of 932

TM 9-2350-261-20-3

REPLACE RAMP PUMP TO PRESSURE RELIEF VALVE HOSE — Continued

0581 00

CLEAN, INSPECT, AND REPAIR

1.

Check tube. Replace cracked or distorted tube.

INSTALLATION

1.

Install hose (6) on tee (11) and ramp pump elbow (10).

2.

Place clamp (9) on hose (6). Align clamp with transfer gearcase. Secure with new tab washer (8) and screw (7).

TIGHTEN SCREW TO 144-192 LB-IN (16-25 N·M) TORQUE. Use torque wrench and socket wrench set.

3.

Place clamp (2) on hose (6). Align clamp (2) with clamp (4) on tube (5). Secure with screw (1) and new locknut (3).

058100-3