TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

  TM-9-2350-261-20-3 - Page 632 of 932

TM 9-2350-261-20-3
REPLACE RAMP PUMP TO HYDRAULIC TANK STRAINER TUBE — Continued
0580 00
FOLLOW-THROUGH STEPS
WARNING
Loose clothing is dangerous around moving belts and pulleys. You could get badly hurt if your
clothes get caught in moving parts.
WARNING
An inoperable/unsafe ramp can fall and kill soldiers. Seal off area behind ramp during testing
and bleeding of hydraulic lines.
1.
Fill hydraulic reservoir (WP 0120 00).
2.
Start engine (see your -10). Check for hydraulic leaks.
3.
Raise and lower ramp several times to bleed air from system (see your -10).
4.
Install power plant rear access panel (WP 0431 00 or WP 0433 00).
5.
Raise and lock ramp (see your -10).
6.
Stop/shutdown engine (see your -10).
END OF TASK
0580 00-4


Back to Top