TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 685 of 932
TM 9-2350-261-20-3
REPLACE BULKHEAD CONNECTION TO RAMP CYLINDER HOSE — Continued
0590 00
FOLLOW-THROUGH STEPS
1.
Check fluid level in tank. Add fluid as needed (see your -10).
WARNING
Wearing loose clothing around moving parts can allow personnel to get caught and could result
in injury or death. Tuck in loose clothing.
WARNING
An inoperable/unsafe ramp can fall and kill soldiers. Seal off area behind ramp during testing
and bleeding of hydraulic lines.
2.
Start engine (see your -10).
3.
Raise and lower ramp several times to bleed air from system (see your -10). Check for hydraulic leaks.
4.
Install power plant rear access panel (WP 0431 00 or WP 0433 00).
5.
Install floor plates (WP 0436 00, WP 0437 00, WP 0438 00, or WP 0441 00).
6.
Raise and lock ramp (see your -10).
7 .
Stop
/
shu tdow n e ngine (see you r -1 0).
END OF TASK
0590 00-5/6 blank
Back to Top
