TM 9-2350-261-20-3
REPLACE FUEL PUMP TO BULKHEAD CONNECTION HOSE (M113A2,
M901A1, AND M1059 ONLY) — Continued
0606 00
INSTALLATION
1.
Secure new hose (3) to fuel pump adapter (4).
2.
Route hose (3) through hull openings. Connect hose to nipple (5).
3.
Install eight clamps (2) on hose next to hull weldnuts. Secure clamps to hull weldnuts with eight screws (1).
FOLLOW-THROUGH STEPS
1.
Open both main fuel shutoff valves (see your -10).
2.
Connect battery ground lead (WP 0294 00).
3.
Bleed fuel line (WP 0599 00).
4.
Start heater (see your -10). Check all fittings for fuel leaks. Turn heater off.
5.
Install rear floor plates (WP 0436 00, WP 0437 00, WP 0438 00, or WP 0441 00).
6.
Install heater duct (WP 0622 00 or WP 0623 00).
END OF TASK
0606 00-2