TM 9-2350-261-20-3
REPLACE BULKHEAD CONNECTION TO HEATER TUBE (M981 ONLY) — Continued
0607 00
12. Install fuel hose (17) on nipple (11).
FOLLOW-THROUGH STEPS
1.
Open engine fuel supply line shutoff valves (see your -10).
2.
Connect battery ground lead (WP 0294 00).
3.
Bleed fuel line (WP 0599 00).
4.
Start heater (see your -10). Check all fittings for fuel leaks. Turn heater off.
5.
Install power plant rear access panel (WP 0431 00 or WP 0433 00)
6.
Install right front floor plate (WP 0441 00).
7.
Install heater duct (WP 0622 00 or WP 0623 00).
8.
Raise and lock ramp (See your-10).
END OF TASK
0607 00-5/6 blank