TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 768 of 932

TM 9-2350-261-20-3

REPLACE PERSONNEL HEATER FUEL FILTER, HOSES, AND FITTINGS

(M1064 ONLY) — Continued

0609 00

9.

Remove elbow (18) from nipple (19) and nipple from heater (20).

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

1.

Apply light coat of sealing compound to all external tapered threads. Do not apply sealant beyond small end of external

tapered threads.

2.

Install plug (12), plug (9), and new packing (4) in ports

1

and

4

of fuel filter (5).

NOTE

Flareless (compression) fittings are used on the fuel lines. When these fittings are first installed,

asleeveiscrimpedonthetubeorhoseend

.Consequently, when tubes or hoses are replaced,

new fitting sleeves are also required.

3.

Install two elbows (10) and (14) and new packings (4) in ports

2

and

3

of fuel filter (5).

0609 00-4