TM 9-2350-261-20-3
REPLACE PERSONNEL HEATER FUEL FILTER, HOSES, AND FITTINGS
(M1064 ONLY) — Continued
0609 00
9.
Install three new tie straps (1) on hose assembly (2).
FOLLOW-THROUGH STEPS
1.
Open heater fuel shutoff valve (see your -10).
2.
Connect battery ground strap (WP 0294 00).
3.
Bleed fuel line (WP 0599 00).
4.
Start heater (see your -10). Check all fittings for leaks. Turn heater off.
5.
Install front floor plates (WP 0437 00).
6.
Install heater duct (WP 0617 00).
7.
Start engine (see your -10).
8.
Raise and lock ramp (see your -10).
9.
Stop engine (see your -10).
END OF TASK
0609 00-7/8 blank