TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 780 of 932

TM 9-2350-261-20-3

REPLACE PERSONNEL HEATER FUEL FILTER, HOSE, TUBE, FITTINGS,

AND SHIELD (M577A2 ONLY) — Continued

0611 00

INSTALLATION

1.

Install two screws (26), new lockwashers (27), flat washers (28), and filter (19).

2.

Install two elbows (18), screws (24), and four packings (25) on filter (19).

3.

Install screw (21), flat washer (22), and clamp (23) on hose (17).

NOTE

If fuel hose was replaced do Step 4, otherwise go to Step 5.

4.

Install spiral wrap (20) on fuel hose (4).

5.

Install hose (17) and hose (4) on two elbows (18). Install elbows on filter (19).

6.

Install nut (12), sleeve (13), adapter (14), and elbow (15) on heater (16).

7.

Install four screws (8), new lockwashers (9), flat washers (10), and shield (11).

8.

Install two clamps (7) and seven clamps (3) on hose (4).

9.

Route hose (4) through openings in hull cross members. Align seven clamps (3) and two clamps (7) with hull weldnuts.

Secure with six new lockwashers (2) and screws (1).

0611 00-4