TM 9-2350-261-20-3
REPLACE PERSONNEL HEATER CONTROL BOX
0613 00
THIS WORK PACKAGE COVERS:
Removal (page 0613 00-1).
Installation (page 0613 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Lockwasher (2)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Battery ground strap disconnected (WP 0294 00)
REMOVAL
1.
Disconnect circuit 400 lead (1) from heater control box lead (2).
2.
Disconnect heater wiring harness (3) from heater control box (4).
3.
Remove two screws (5) and control box (4) from control box case (6).
4.
Remove two screws (7), case (6), and lockwashers (8) from hull weldnuts (9). Discard lockwashers.
061300-1