TM 9-2350-261-20-3
REPLACE PERSONNEL HEATER CONTROL BOX — Continued
0613 00
INSTALLATION
1.
Place two new lockwashers (8) and control box case (6) on hull weldnuts (9). Secure with two screws (7).
2.
Install heater control box (4) in case (6). Secure with two screws (5).
3.
Connect heater wiring harness (3) to control box (4).
4.
Connect circuit 400 lead (1) to control box lead (2).
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (WP 0294 00).
2.
Start heater (see your -10). Check that control box works right. Turn heater off.
END OF TASK
0613 00-2