TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 802 of 932

TM 9-2350-261-20-3

REPLACE FUEL SHUTOFF VALVE ASSEMBLY (M113A2 AND M1059 ONLY) — Continued

0615 00

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

1.

Apply thin layer of sealing compound to external tapered threads.

2.

Install new preformed packing (5), adapter (4), and shutoff valve (3) on heater fuel filter (6).

3.

Install inlet elbow (2) on shutoff valve (3).

4.

Install fuel filter supply hose (1) on adapter (2).

FOLLOW-THROUGH STEPS

1.

Open heater fuel shutoff valve (see your -10).

2.

Bleed air from fuel lines (WP 0599 00).

3.

Turn heater ON (see your -10). Check for proper operation and leaks.

4.

Turn heater OFF (see your -10).

END OF TASK

0615 00-2