TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 809 of 932

TM 9-2350-261-20-3

REPLACE PERSONNEL HEATER DUCT AND HOSES — Continued

0617 00

INSTALLATION

1.

Align duct (5), three insulator washers (9), and shield (8) with holes in carrier floor. Secure with three washers (7) and

screws (6).

2.

Install nipple (3) in duct (5) and nipple (3) in duct (4). Secure with latch on each nipple.

3.

Install two clamps (1) on hose (2). Secure hose in two nipples (3) with clamps.

FOLLOW-THROUGH STEPS

1.

Start engine (see your -10).

2.

Raise and lock ramp (see your -10).

3.

Stop engine (see your -10).

END OF TASK

0617 00-3/4 blank