TM 9-2350-261-20-3
REPLACE PERSONNEL HEATER ASSEMBLY (ALL EXCEPT M1064) — Continued
0619 00
1.
Install plenum (13) on heater (2). Secure with four new lockwashers (12) and screws (11).
2.
Install two clamps (1) in two mounts (10).
3.
Install two mounts (10) on power plant bulkhead. Secure with four screws (6), three new lockwashers (7), ground
strap (8), and four nuts (9).
4.
Slide clamp (4) on heater intake pipe (14) and clamp (5) on heater exhaust pipe (15). Install heater (2) and shield (3) on
mounts (10). Secure with two clamps (1).
0619 00-6