TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 806 of 932

TM 9-2350-261-20-3

REPLACE PERSONNEL HEATER FUEL FILTER/BRACKET (M113A2

AND M1059 ONLY) — Continued

0616 00

3.

Install two plugs (9) and new packings (10) in ports

2

and

3

of fuel filter (4).

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

4.

Install elbow (11), valve (12), adapter (13), and new packing (14) in port

1

of fuel filter (4). Apply sealing compound to

external pipe threads of elbow and adapter.

5.

Install elbow (15) and new packing (16) in port

4

of fuel filter (4).

6.

Install outlet hose (17) on elbow (15).

7.

Install inlet hose (18) on elbow (11).

FOLLOW-THROUGH STEPS

1.

Open heater fuel shutoff valve (see your -10).

2.

Bleed air from fuel lines (WP 0599 00).

3.

Start heater (see your -10). Check for leaks. Turn heater off.

END OF TASK

0616 00-4