TM 9-2350-261-20-3
REPLACE HEATER AIR INTAKE AND EXHAUST PIPES (M1064 ONLY) — Continued
0623 00
FOLLOW-THROUGH STEPS
1.
Install heater assembly (WP 0621 00).
2.
Connect battery ground strap (WP 0294 00).
3.
Start heater. Check for intake and exhaust leaks. Turn heater off (see your -10).
4.
Start engine (see your -10).
5.
Raise and lock ramp (see your -10).
6.
Stop/shutdown engine (see your -10).
END OF TASK
0623 00-3/4 blank