TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 833 of 932

TM 9-2350-261-20-3

REPLACE HEATER AIR INTAKE AND EXHAUST PIPES (M1064 ONLY)

0623 00

THIS WORK PACKAGE COVERS:

Removal (page 0623 00-1).

Installation (page 0623 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Gasket (2)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

Battery ground strap disconnected (WP 0294 00)

Heater assembly removed (WP 0621 00)

REMOVAL

1.

Remove air intake pipe (1) from intake elbow (2).

2.

Loosen two nuts (3) on U-bolt (4), and remove exhaust pipe (5) and clamp (6) from exhaust elbow (7).

3.

Remove six screws (8), intake elbow (2), exhaust elbow (7), and two gaskets (9) from carrier top deck. Discard gaskets.

062300-1