TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 830 of 932

TM 9-2350-261-20-3

REPLACE HEATER AIR INTAKE AND EXHAUST PIPES (ALL EXCEPT

M1064) — Continued

0622 00

REMOVAL

1.

Remove clamp (16) and elbow (15) from intake elbow (9).

2.

Remove two nuts (14), U-bolt (12), and clamp (13) from exhaust pipe (4).

3.

Remove six screws (11), intake elbow (10), exhaust elbow (9), and two gaskets (8) from carrier top deck. Discard

gaskets.

4.

Remove four screws (6), locknuts (7), two bulkhead gaskets (5), and exhaust pipes (2), (3), and (4) from power plant

bulkhead. Discard gaskets and locknuts.

5.

If necessary, remove grommet (1) from power plant bulkhead. Discard grommet.

0622 00-2