TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 324 of 767

TM 9-2350-261-20-4

REPLACE ADAPTER ACCESS PLATE TO GENERATOR ELECTRICAL CABLE

ASSEMBLY (M1059 ONLY) — Continued

0703 00

INSTALLATION

WARNING

Before you do any maintenance, discharge all capacitors to ground or electrical shock could

injure personnel.

NOTE

Left and right cable assemblies are replaced the same way.

1.

Connect cable assembly (1) to smoke generator cover assembly connector 5J1 (3).

2.

Connect cable assembly (1) to adapter access plate connector (2).

FOLLOW-THROUGH STEPS

1.

Install smoke generator assembly on bracket (WP 0697 00).

2.

Install inboard armor shield (WP 0713 00).

3.

Connect battery ground lead (WP 0294 00).

4.

Set circuit breaker CB1 to ON. See TM 3-1040-283-10.

END OF TASK

0703 00-3/4 blank