TM-9-2350-261-20-4
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4
TM-9-2350-261-20-4 - Page 328 of 767
TM 9-2350-261-20-4
REPLACE AIR COMPRESSOR ASSEMBLY (M1059 ONLY) — Continued
0704 00
INSTALLATION
WARNING
Before you do any maintenance, discharge all capacitors to ground or electrical shock could
injure personnel.
1.
Position air compressor assembly (1) on ceiling of carrier. Have helpers assist. Secure with eight screws (2), new
lockwashers (3), washers (4), and washers (5). TIGHTEN SCREWS TO 264-288 LB-IN (30-33 N·M) TORQUE.
Use torque wrench.
2.
Remove safety caps (6) from two air lines (7) and dust covers (8) from two air compressor reservoir fittings (9).
Connect lines to fittings.
3.
Connect air compressor electrical cable assembly (10) to compressor cable assembly connector (11).
070400-3
Back to Top
