TM 9-2350-261-20-4
REPLACE SMOKE GENERATOR FUEL LINES AND GUARDS (M1059 ONLY) — Continued
0707 00
INSTALLATION
1.
Connect fuel lines (10) and (11) to two smoke generator cover assemblies (9).
2.
Secure fuel supply line (10) and return line (11) to hull with 11 clamps (1) and (8), new lockwashers (5), and screws (6).
3.
Connect fuel lines (10) and (11) to two fuel plugs (12).
FOLLOW-THROUGH STEPS
1.
Install smoke generator assembly on bracket (WP 0697 00).
2.
Install inboard armor shield (WP 0713 00).
3.
Connect battery ground lead (WP 0294 00).
4.
Set circuit breaker CB1 to ON. See TM 3-1040-283-10.
END OF TASK
0707 00-3/4 blank
4.
Install two guards (7) on hull. Secure with three new lockwashers (5), washers (4), and
screws (6). TIGHTEN SCREWS TO 96-120 LB-IN (11-14 N·M). Use torque wrench.