TM 9-2350-261-20-4
REPLACE SMOKE GENERATOR ADAPTER ACCESS PLATE TO COVER
ASSEMBLY AIR HOSE (M1059 ONLY) — Continued
0710 00
INSTALLATION
1.
Connect air hose (2) to cover assembly quick disconnect coupling (3).
2.
Connect air hose (2) to adapter assembly elbow (1).
FOLLOW-THROUGH STEPS
1.
Install smoke generator assembly on bracket (WP 0697 00).
2.
Install inboard armor shield (WP 0713 00).
3.
Connect battery ground lead (WP 0294 00).
4.
Set circuit breaker CB1 to ON. See TM 3-1040-283-10.
END OF TASK
0710 00-3/4 blank