TM 9-2350-261-20-4
REPLACE/REPAIR SMOKE GENERATOR FUEL FILTER/WATER
SEPARATOR (M1059 ONLY)
0715 00
THIS WORK PACKAGE COVERS:
Removal (page 0715 00-1).
Repair (page 0715 00-2).
Installation (page 0715 00-3).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Filter element gasket
Lockwasher (2)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Battery ground lead disconnected (WP 0294 00)
REMOVAL
NOTE
T here are two f uel f ilter/w ater separators. O n e i s located on the l eft side of t he
carrier
and the
other on the right. Both are removed and installed the same way. Only one is shown.
Plug fuel hoses after removing to prevent leakage.
1.
Remove fuel hose (1) from inlet tube adapter (2) on fuel filter/water separator (3).
2.
Remove fuel hose (4) from outlet tube adapter (5) on fuel filter/water separator (3).
3.
Remove two screws (6), nuts (7), washers (8), lockwashers (9), and fuel filter/water separator(3)fromarmorshield
(10). Discard lockwashers.
071500-1