TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 442 of 767

TM 9-2350-261-20-4

REPLACE/REPAIR POWER DISTRIBUTION BOX A3 (M1068 ONLY)

0736 00

THIS WORK PACKAGE COVERS:

Removal (page 0736 00-1).

Disassembly (page 0736 00-2).

Assembly (page 0736 00-3).

Installation (page 0736 00-4).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Locknut (4)

Lockwasher (12)

Personnel Required

Power-Generation Equipment Repairer 52D10

Helper (H)

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

All external power disconnected (TM 11-7010-256-

12&P)

Battery ground lead disconnected (WP 0294 00)

REMOVAL

NOTE

Tag all wires before removal.

1.

Disconnect cable (1) from connector (2) on power distribution box (3).

2.

Remove 12 screws (4), lockwashers (5), and lid (6) from power distribution box (3). Discard lockwashers.

3.

Remove screw (7), washer (8), and two circuit 1 leads (9) from terminal 1 (10).

4.

Remove screw (7), washer (8), and two circuit 2 leads (11) from terminal 2 (12).

5.

Remove screw (7), washer (8), and circuit 3 lead (13) from terminal 3 (14).

6.

Remove two screws (15), washers (16), and power distribution box (3) from bulkhead.

073600-1