TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 446 of 767

TM 9-2350-261-20-4

REPLACE POWER ENTRY BOX ASSEMBLY A4 (M1068 ONLY)

0737 00

THIS WORK PACKAGE COVERS:

Removal (page 0737 00-1).

Installation (page 0737 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Adhesive (WP 0782 00, Item 3)

Lockwasher (12)

Personnel Required

Power-Generation Equipment Repairer 52D10

Helper (H)

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

All external power disconnected (TM 11-7010-256-

12&P)

Battery ground lead disconnected (WP 0294 00)

REMOVAL

NOTE

Tag all leads during removal for proper installation later.

1.

Remove 12 screws (1), lockwashers (2), and lid (3) from power distribution box (4). Discard lockwashers.

2.

Remove three screws (5) and lockwashers (6) from terminal block (7).

3.

Remove two cable W13 leads (8), two cable W14 leads (9), and one ground lead (10) from terminal block (7).

4.

Remove three screws (11), washers (12), and power entry box (13) from external rear bulkhead. Feed leads through rear

of bulkhead. Have helper assist.

5.

Do not remove gasket (14) unless damaged.

073700-1