TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 468 of 767

TM 9-2350-261-20-4

REPLACE CASCADE REMOTE HARNESS (M1068 ONLY)

0745 00

THIS WORK PACKAGE COVERS:

Removal (page 0745 00-1).

Installation (page 0745 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Locknut (4)

Lockwasher (10)

Lockwasher (10)

Personnel Required

Power-Generation Equipment Repairer 52D10

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

All external power disconnected (TM 11-7010-256-

12&P)

Battery ground lead disconnected (WP 0294 00)

REMOVAL

1.

Remove faceplate (1) on inverter housing A2 (2) by removing ten screws (3) and lockwashers (4). Discard lockwashers.

2.

Loosen captive screws on connectors and disconnect RP1 harness (5) from inverters (6).

3.

Remove ten screws (7), and lockwashers (8), from faceplate (9). Lower faceplate (9) to gain access to RP1 harness

(5). Discard lockwashers.

4.

Remove four locknuts (10), screws (11), and RP1 remote harness (5) from faceplate (9). Remove harness. Discard

locknuts.

074500-1