TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 477 of 767

TM 9-2350-261-20-4

REPLACE HARNESS W32 (M1068 ONLY) — Continued

0749 00

8.

Disconnect W32 harness plug P107 (1) from patch panel box A10 jack J138 (2).

9.

Disconnect W32 harness plug P16 (3) from power control enclosure A1 jack J36 (4).

10. Disconnect W32 harness plug P15 (5) from power control enclosure A1 jack J32 (6).

11. Disconnect W32 harness plug P5 (7) from data panel assembly A13 jack J1 (8).

12. Disconnect W32 harness plug P4 (9) from data panel assembly A13 jack J4 (10).

13. Remove screw (11) and clamps (12) and (13) from weldnut (14) below patch panel box A10 (15). Remove clamp (12)

from W32 harness (16).

14. Remove two screws (17), washers (18), and clamps (19) from power control enclosure A1 (20) and W32 harness (16).

15. Remove five tie straps (21) and W32 harness (16) from carrier. Discard tie straps.

0749 00-2