TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 478 of 767

TM 9-2350-261-20-4

REPLACE HARNESS W32 (M1068 ONLY) — Continued

0749 00

INSTALLATION

1.

Route branch of W32 harness (1) along fuel line (2) to data panel assembly A13 (3). Secure W32 harness with five

new tie straps (4).

2.

Install two clamps (5) on W32 harness (1) and secure to power control enclosure A1 (6) with two screws (7) and

washers (8).

3.

Inst all clam p (9) on W 32 harness (1) and secure clamps (9

)

and

(

10 ) to weldnu t (1 1) below patch panel b ox A1 0

with

screw ( 13).

4.

Connect W32 harness plug P107 (14) to patch panel box A10 jack J138 (15).

5.

Connect W32 harness plug P4 (16) to data panel assembly A13 jack J4 (17).

6.

Connect W32 harness plug P5 (18) to data panel assembly A13 jack J1 (19).

7.

Connect W32 harness plug P15 (20) to power control enclosure A1 jack J32 (21).

8.

Connect W32 harness plug P16 (22) to power control enclosure A1 jack J36 (23).

074900-3