TM-9-2350-261-20-4
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4
TM-9-2350-261-20-4 - Page 51 of 767
TM 9-2350-261-20-4
REPLACE IGNITER
0638 00
THIS WORK PACKAGE COVERS:
Removal (page 0638 00-1).
Inspection (page 0638 00-1).
Installation (page 0638 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Gasket
Lockwasher
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Trim vane lowered (see your -10)
Power plant access door open (see your -10)
Battery ground lead disconnected (WP 0294 00)
REMOVAL
1.
Loosen four nuts (1). Turn cover plate (2) to the left and remove.
2.
Remove screw (3), lockwasher (4), igniter ground lead (5), and ground strap (6) from coolant heater. Discard lockwasher.
3.
Remove two nuts (7) and resistor strap (8) from igniter (9). Bend strap out of way.
4.
Remove igniter (9) and gasket (10) from heater. Discard gasket.
INSPECTION
1.
Check ground strap. Replace igniter if strap is worn or broken.
063800-1
Back to Top
