TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 534 of 767

TM 9-2350-261-20-4

REPLACE CYLINDER DISCHARGE TUBES

0768 00

THIS WORK PACKAGE COVERS:

Removal (page 0768 00-1).

Installation (page 0768 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Lockwasher (6)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Trim vane lowered (see your -10)

Power plant access door open (see your -10)

Power plant removed (if bottom discharge tube is to be

removed) (WP 0131 00)

REMOVAL

1.

Remove six screws (1), lockwashers (2), and clamps (3) from six hull weldnuts. Discard lockwashers.

NOTE

If periscope power cable is stowed behind cylinder discharge tube, move cable away from work

area to prevent damage to cable. Elbow will be removed for M1064 only.

2.

Remove tube (4) and elbow (7) from fire extinguisher cylinder (5) and nipple (6). Remove clamp (3) from tube.

076800-1