TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4

  TM-9-2350-261-20-4 - Page 526 of 767

TM 9-2350-261-20-4
REPLACE FIRE EXTINGUISHER CONTROL VALVE AND EXTERNAL
HANDLE — Continued
0766 00
6.
Install valve (2) on fire extinguisher cylinder (10). Secure with captive nut (11).
CAUTION
Fire extinguisher control valve sealed with wire will not work. Make sure seal wire is made
out of light copper.
Do not nick wire seal during installation.
7.
Install new copper seal wire (5) on control valve (2). Use lead seal hand press.
8.
Install new seal wire (12) between handle (8) and support bracket (9). Use lead seal hand press.
FOLLOW-THROUGH STEPS
1.
Install external handle shield (WP 0763 00, WP 0764 00, or WP 0765 00).
END OFTASK
0766 00-5/6 blank


Back to Top