TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 186 of 785

TM 9-2350-261-34

REPLACE ENGINE — Continued

0021 00

31. Remove nut (4), screw (5), and governor control link (6) from throttle arm (7).

32. Remove two screws (8) and gauge (9) from governor (10).

33. Remove locknut (11) and screw (12) from bracket assembly (13). Use cross-tip screwdriver. Discard locknut.

34. Before removing screw (14), raise inner transfer shaft (15) high enough to tilt the outer transfer shaft (16).

35. Remove screw (14) and lockwasher (17) from bracket assembly (13). Discard lockwasher.

36. Remove two screws (18), lockwashers (19), nuts (20), and bracket assembly (13) from power plant. Discard lockwashers.

37. Remove screw (23) and clamp (22) from differential oil hose (21).

38. Disconnect and remove two differential oil hoses (21) and (20) from elbows (19).

39. Remove two elbows (19) from engine oil cooler housing.

0021 00-13