TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 516 of 785

TM 9-2350-261-34

REPLACE FUEL CONTROL VALVE — Continued

0062 00

FUEL FLOW TEST

1.

Connect fuel control valve to coolant heater fuel hose.Fuelpressuremustbe3to15psi(21to103kPa)whenfuel

valve is open.

2.

Place fuel control valve outlet over calibrated and overflow containers.

3.

Make sure the body of fuel valve is grounded.

4.

Energize fuel valve solenoids. Connect two solenoid leads to a 24 V dc power source. Solenoids are now open for

high heat fuel flow.

006200-3