TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 508 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M1064 ONLY) — Continued

0061 00

95. Thread terminal ground lead (13) and coolant heater connector (14) through driver’s compartment bulkhead opening.

96. Connect coolant heater connector (14) of wiring harness (15) to coolant heater receptacle (16).

97. Connect control box connector (17) of wiring harness (15) to control box receptacle (18).

98. Connect main wiring harness 402A lead (19) to coolant heater wiring harness lead (20).

99. Install wiring harness (15) on front main wiring harness (21). Secure with eight straps (22).

100. Install wiring harness plate (23) on driver’s compartment bulkhead. Secure with four screws (10) and washers (11).

0061 00-19