TM 9-2350-261-34
INSTALL ENGINE COOLANT HEATER KIT (M1064 ONLY) — Continued
0061 00
52. Remove two screws (12) that secure personnel heater duct to floor plate.
53. Install two hoses (10), clamps (13), and heater duct on floor plate. Secure with two screws (12).
54. Install insulation tubing (14) on hose (15). Secure with insulation tape.
55. Install two hoses (15) and (16) on two elbows (8). Secure with two clamps (17).
56. Install hose (16) on side of sponson. Secure with three clamps (18) and screws (19).
0061 00-10