TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 497 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M1064 ONLY) — Continued

0061 00

36. Install tee (1) in coolant heater (8).

37. Install bushing (2) in tee (1).

38. Install elbow (3) in bushing (2).

39. Install bushing (4) in tee (1).

40. Install shutoff cock (5) in bushing (4).

41. Install hose (9) on elbow (3). Secure with clamp (10).

42. Remove two screws (11), washers (12), plate (13), and gasket (14) from engine block right side. Discard plate and gasket.

43. Install elbow (6) and draincock (7) in mount (15).

44. Apply a thin coat of sealing compound (WP 0105 00, Item 18) to both sides of gasket (16) before assembly.

45. Install mount (15) and gasket (16) on engine block opening. Secure with two screws (11) and washers (12).

46. Install hose (17) on elbow (6). Secure with clamp (18).

0061 00-8