TM-9-2350-261-34
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
TM-9-2350-261-34 - Page 489 of 785
TM 9-2350-261-34
INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued
0060 00
FOLLOW-THROUGH STEPS
1.
Install personnel heater (see your -20).
2.
Lower power plant grille (see your -20).
3.
Fill carrier cooling system (see your -20).
4.
Fill coolant heater cooling system (see your -20).
5.
Connect battery ground lead (see your -20).
6.
Bleed coolant heater fuel line (see your -20).
7.
Start coolant heater (see your -10). Check for leaks and that heater operates properly. Turn heater off.
8.
Install rear and right front floor plates (see your -20).
9.
Install driver’s power plant access panel (see your -20).
10. Install power plant rear access panel (see your -20).
11. Close power plant front access door and raise trim vane (see your -10).
12. Raise and lock ramp (see your -10).
13. Stop engine (see your -10).
14. Install generator set (see your -10) or 5.0 KW APU (see your -20).
END OF TASK
0060 00-28
Back to Top
