TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 479 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued

0060 00

NOTE

Parts (1) through (15) and (29) through (31) are already installed if the electronic equipment

heater has been installed.

86. Install nipple (1) in tee (2).

87. Install shutoff cock (3) on nipple (1).

88. Install adapter (4) in shutoff cock (3).

89. Install fuel hose (5) in adapter body (4). Secure with sleeve (6) and nut (7).

90. Install nipple (8) in tee (2).

91. Install tee (9) on nipple (8).

92. Install plug (10) in tee (9).

93. Install bracket (11) on fuel hose guard (12). Secure with two screws (13) and nuts (14).

94. Install adapter (15) in tee (2).

95. Install coolant heater fuel shutoff cock (16) on adapter (15).

96. Install adapter body (17) on coolant heater fuel shutoff cock (16).

97. Install fuel hose (18) in adapter body (17). Secure with sleeve (19) and nut (20).

98. Install adapter body (21) in tee (9).

99. Connect fuel hose (22) to adapter body (21).

100. Remove screw (23), lockwasher (24), and personnel heater fuel pump lead (25) from weldnut (26).

101. Install coolant heater fuel pump lead (27) and personnel heater fuel pump lead (25) on weldnut (26). Secure with screw

(23) and three lockwashers (24).

102. Connect circuit 400C lead (28) to coolant heater fuel pump lead (27).

0060 00-18