TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 477 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued

0060 00

75. Clean external pipe threads of all fittings with solvent, cleaning compound.

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

76. Apply a thin, even coat of primer and then sealing compound (WP 0105 00, Item 17) to cleaned external pipe threads of

all fittings. Do not apply primer or sealing compound beyond small end of threads.

77. Install adapter body (1) on coolant heater fuel pump (2).

78. Install fuel hose (3) in adapter body (1). Secure with sleeve (4) and nut (5).

79. Install elbow (6) on coolant heater fuel pump (2).

80. Install fuel hose (7) in elbow (6). Secure with sleeve (8) and nut (9).

NOTE

Parts (10) through (17) are already installed if the electronic equipment heater has been installed.

81. Disconnect fuel hose (10) from adapter body (11) on personnel heater fuel pump (12).

82. Remove and retain adapter body (11) from personnel heater fuel pump (12).

83. Install adapter body (13) on personnel heater fuel pump (12).

84. Secure elbow (14) to adapter (13).

0060 00-16