TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 485 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued

0060 00

118. Remove four screws (13), washers (14), and plate (15) from driver’s compartment bulkhead. Discard plate.

119. Thread terminal ground lead (16), coolant heater connector (17), and wiring harness (18) through new wiring harness

plate (19) and driver’s compartment bulkhead opening.

120. Install wiring harness plate (19) on driver’s compartment bulkhead. Secure with four screws (13) and washers (14).

121. Connect coolant heater connector (17) of wiring harness (18) to coolant heater receptacle (20).

122. Install wiring harness (18) and terminal ground lead (16) on mounting bracket (21). Secure with two screws (22),

nuts (23), clamps (24), and lockwashers (25).

123. Connect control box connector (11) of wiring harness (12) to control box receptacle (13).

124. Connect main wiring harness circuit 400C lead (14) to coolant heater wiring harness lead (15).

125. Install wiring harness (12) on front main wiring harness (16). Secure with eight straps (17).

0060 00-24