TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 488 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued

0060 00

139. Install wiring harness (1) on two weldnuts (5). Secure with two clamps (6) and screws (7).

140. Remove three screws (8) that secure fuel control cable (9) and three clamps (10) to three weldnuts (11).

141. Install wiring harness (1) and fuel control cable (9) to three weldnuts (11). Secure with three screws (8), clamps (10),

and clamps (12).

142. Replace standard generator belts with kit belts (see your -20).

143. Replace standard fan drive belts with kit belts (see your -20).

144. Open coolant heater fuel valve (8).

0060 00-27