TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 495 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M1064 ONLY) — Continued

0061 00

27. Install two short hoses (1) in heat exchanger (2). Secure with two clamps (3).

28. Install two elbows (4) on two short hoses (1). Secure with two clamps (5).

29. Install two hoses (1) in battery drawer (6). Secure with two brackets (7), four screws (8), washers (9), and nuts (10).

30. Install two hoses (11) to two elbows (4). Secure with two clamps (12).

31. Install batteries. Close and latch battery drawer (6).

32. Cut auxiliary tank hose (13). Install tee (14) and secure with two clamps (15).

33. Install hose (16) on tee (14). Secure with clamp (17).

34. Clean external pipe threads of tee (1), bushing (2), elbow (3), bushing (4), shutoff cock (5), elbow (6), and draincock (7)

with solvent, cleaning compound.

0061 00-6