TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 535 of 785

TM 9-2350-261-34

REPLACE DIODE AND MOTOR RESISTOR — Continued

0067 00

NOTE

Note direction of arrow on diode so it can be installed later.

2.

Remove diode (4) from holder (5).

3.

Remove motor resistor (6) leads from terminals 4 and 6 on terminal board (7).

4.

Remove nut (8), screw (9), and motor resistor (6) from bracket (10).

5.

Use multimeter to check diode. Set meter to above 200 mV scale. Place probes on each end of diode and note reading.

Sw itch p ro bes a n d note r eading. One read ing m ust i ndicate c ontin uity and other read ing m ust in dicat e h igh r esistan ce

.

they do not, replace diode.

0067 00-2