TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34

  TM-9-2350-261-34 - Page 536 of 785

TM 9-2350-261-34
REPLACE DIODE AND MOTOR RESISTOR — Continued
0067 00
6.
Use multimeter to check motor resistor. Place probes on resistor leads. Multimeter should read 0 ohms resistance.
Replace resistor if reading is infinity.
INSTALLATION
1.
Install motor resistor (6) on bracket (10) with screw (9) and nut (8).
2.
Secure motor resistor (6) leads to terminals4and6ofterminalboard(7)
.
3.
Install diode (4) in holder (5).
006700-3


Back to Top