TM 9-2350-261-34
REPLACE LAN A CABLE W101 AND/OR LAN B CABLE W102 (M1068 ONLY) — Continued
0092 00
4.
Connect cable W101 jack J103 (5) with inside bushing (12) on faceplate LAN A (13) secure with outside bushing
(14) and jamnut (15).
5.
Connect cable W102 jack J104 (6) with inside bushing (12) on faceplate LAN B (16) secure with outside bushing
(14) and jamnut (15).
6.
Secure cable W101 (5) and/or W102 (6) to hull with two clamps (4), screws (3), four washers (2), and two new locknuts
(1).
7.
Secure slack in cable with new tie straps (7)
,
as r equired.
8.
Inst all f aceplate (17) on external comm unications box A11 (11) and secure w ith
14
new lockwashers (18) and
screws (19).
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (see your -20).
2.
Turn MASTER SWITCH
to
ON (see your -10). C heck that electrical system works properly.
3.
Turn MASTER SWITCH
to
OFF (see y our -10).
END OF TASK
0092 00-5/6 blank