TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 729 of 785

INSTALL CHEMICAL AGENT AUTOMATIC ALARM MOUNTING KIT

(M113A2 ONLY) — Continued

23. Remove four C-clip retainers (1) and backshells (2) from four leads (3).

24. Remove coupling nut (4), spring tension washer (5), retainer (6), bushing (7), nut (8), lockwasher (9), flat washer (10),

and insulator washer (11) from harness (12).

25.

Insert harness (12) through hole in

carrier

to p plate. Have h elper assist.

26. Install insulator washer (11), flat washer (10), lockwasher (9), nut (8), bushing (7), retainer (6), spring tension washer

(5), and coupling nut (4) on harness (12).

27. Install four backshells (2) and C-clip retainers (1) on leads (3).

28. Attach wiring harness (13) to bracket (14) with four screws (15) and new locknuts (16).

29. Attach four leads (3) to leads (17) as follows:

509E to 509G

509F to 509H

6D POS to 6E POS

7D NEG to 7E NEG

3 0.

In stall bracket (14) on

carrier

with fo ur screws ( 18 ) and wash ers (19 ).

0098 00-8

0098 00

TM 9-2350-261-34