TM-9-2350-261-34
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
TM-9-2350-261-34 - Page 727 of 785
TM 9-2350-261-34
INSTALL CHEMICAL AGENT AUTOMATIC ALARM MOUNTING KIT
(M113A2 ONLY) — Continued
0098 00
16.
R em ove tw o screws (5) and washers ( 4) from hull.
1 7.
Place junction b ox ( 3) on h ull. S ecure w ith two washers (4) an d scr
ews (5). TIGHTEN SCREWS TO 72-78
LB
-
IN
(8 -9 N·M) TO R QU E. Use torque wrench (WP 0 104 0 0, I tem 57).
18. Route alarm unit cable (1) over cradle (2) and along main wiring harness.
19. Connect wiring harness (22) plug (23) to jack on bottom of junction box (5).
0098 00-6
Back to Top
