TM-9-2350-273-BD
M48/M60 SERIES TANK, COMBAT FULL-TRACKED 105-MM GUN
TECHNICAL MANUAL; OPERATORS, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; BATTLEFIELD DAMAGE ASSESSMENT AND REPAIR
TM-9-2350-273-BD - Page 74 of 288
TM 9-2350-273-BD
FUEL SUPPLY SYSTEM
Procedural Steps(Cont'd)
3. Wrap rubber strips or hose around substitute fuel pump body so that it will be tightly
secured when installed.
4.
5.
Install substitute fuel pump in cover assembly.
Obtain a fuel pump connector and cable.
Connect fuel pump to connector.
6. Splice fuel pump cable and red wire from cover assembly cable together. Insulate
connector with shrink tubing.
7. Attach black wire from cover assembly cable to ground terminal on fuel pump.
8. Install cover and pump assembly to fuel tank.
9. Record the BDAR action taken. When the mission is completed, as soon as
practicable, repair tank using standard maintenance procedures.
4-7
Back to Top
